Altman WL-130 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Altman WL-130. Altman WL-130 4 pagina's. Led work light

Pagina afdrukken
I
G
NSTALLATION
UIDE
Adjusting Tilt
The LED Work Light can have its tilt adjusted via the two lock off handles on each side of the luminaire (refer to Figure 1 on page 3).
Simple loosen (but DO NOT REMOVE) each handle so the unit is able to swing up and down. Set tilt as desired and re-tighten the
two lock off handles so the unit does not move from the set position.
CLEANING AND CARE
WARNING! All cleaning should be performed with power completely removed from the luminaire. Never remove protective covers
when luminaire is powered. Wear appropriate protective eye wear and gloves when cleaning the fixture. All service and maintenance,
other than described herein, should be performed by a qualified technician or Authorized Service Center. AT NO TIME SHOULD THE
LED BE TOUCHED.
Special Cleaning and Care Instructions
Being a solid-state fixture, and unlike most fixtures, the LED Work Light requires very little routine maintenance by the user.
WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or near the LED
Work Light. These types of cleaners or solvents can permanently damage the fixture.
If you have any questions regarding the use or care of your LED Work Light, please contact Altman Lighting technical support or your
local Authorized Dealer.
IMPORTANT! The Altman Lighting LED Work Light is a solid state, convection cooled luminaire. As with any solid state luminaire it
is important that these units not run in a continuous 24/7 operation but be allowed sufficient OFF time during their operation.
Service and Maintenance
For all other service and maintenance issues, please contact your local Altman Lighting office or an Authorized Service Center.
WARNING! Disassembly (other than as described herein), alterations, unauthorized service, etc. will void the product warranty.
Contact your local Altman Lighting office or an Authorized Service Center for technical support and service.
4
Cleaning and Care
LED Work Light