ABC Hobby Grid Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ABC Hobby Grid. ABC Hobby Grid 13 pagina's. Ttr original radio control car
Pagina afdrukken
11
3 x 8 mm
Button Screw
12
23
25
Saver Serration
Servo Horn
Saver Spring
(Gold)
X 2
Saver Spring
(Silver)
4.8 mm Ball Stud
3 mm Nut
UPPER MOUNT INSTALLATION
Battery Cover
Insert the dumper piston
with grease applied on
each dumper sleeve.
Click !
Tie Rod
RADIO SYSTEM
All electronics stuffs are not included in this kit.
Antenna Wire
Receiver
Transmitter
Steering Servo
Set the reverse
switch of the
transmitter so that servo
Horn moves in the direction
of the arrow when you operated
a steering to the right.
Sandwich all springs between
knuckle and kingpin balls.
3 x 8 mm
Button Screw
Click !
Tie Rod
Saver
Spring
Battery
(Silver)
Saver
Spring
(Gold)
Switch
Connector
2
Connect
to Motor
Speed Controller
Steering Reverse Switch
The position of the
reverse switch
varies according to
a transmitter.
3
**When the power is ON, the servo horn should
be in the neutral position as shown in the picture.
3 x 8 mm Button Screw
Click !
Tie Rod
Click !
Cable Cramp
Battery Cover
Saver Cap
Servo Horn
Choose the Saver
Serration much
with your servo.
Saver Serration
Use the screw from your servo.
4.8 mm Ball Stud
3 mm Nut
90 Degrees