Alto MICRO3A Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alto MICRO3A. Alto MICRO3A 8 pagina's. Micro series monitors passive & active models
Ook voor Alto MICRO3A: Gebruikershandleiding (8 pagina's)
Pagina afdrukken
-. For MICRO series Active Monitor Speakers
(1) Power Indicator
This LED lights up blue when the MICRO series active speaker is powered on.
(2) Power Switch
This switch is used to turn the MICRO series active speaker on or off.
Caution: Make sure your supply voltage is identical to the value marking on your products before turning on the
power switch.
(3). VOLTAGE SELECTOR
There are two kinds of voltages for your operation
(4) AC Socket with Main Fuse
This socket is used to connect your MICRO series active monitor speakers with the mains.
Caution: B
efore turn on the power, p
replace the fuse with the same type by the qualified personnel
(5) OUT/LINK
This balanced 6.3
(6) SIGNAL INPUT
This balanced MIC connector is used to input the program sources in balanced configuration.
(7) VOLUME Control
Adjust this trim pot to get the proper input gain.
lease make sure the voltage is identical to the values marking on the products.
MIC connector can be used to link the speaker output.
30WATTS
(5)
L
(6)
R
Signal Input
(7)
MIN
(1)
(2)
from this switch you can select
only
.
2
LTO
MAX
VOL
MICRO 3A
CONTINUOUS 30 WATTS
MODEL
SERIAL
POWER
SW
ON
OFF
Use only with a 250V fuse
115V
230V
210-240: 1.0A 250VAC
90-120: 2.0A 250VAC
(4)
(3)
the voltage at 115V or 230V.
R