Alto ACTIVE Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Alto ACTIVE. Alto ACTIVE 12 pagina's. Ms monitor speaker enclosures active models
Ook voor Alto ACTIVE: Gebruikershandleiding (12 pagina's)

Pagina afdrukken

4.0 Maintenance

WARNING! Always disconnect the plug from the

socket prior to maintenance or cleaning.

To ensure a long and problem free working life,

please take the following advice:

Wash out water hose, high pressure hose,

spray lance and accessories before mounting.

Clean the couplings of dust and sand.

Rinse the foam sprayer after use.

Any repair should always be made in an

authorised workshop with original spare parts.

4.1 Cleaning of nozzle

clogging up in the nozzle causes a pump pres-

su re which is too high. This is why cleaning is

required immediately.

1. Stop the machine and disconnect the nozzle.

2. Clean the nozzle with the cleaning needle (8).

IMPORTANT: The needle should only be used

when the spray lance is detached!

3. Flush the spray lance backwards with water.

4.2 Cleaning of water inlet ﬁ lter

Clean the water inlet ﬁ lter regularly once a month

or more frequently according to use. Care-fully

loosen the ﬁ lter with a screwdriver and clean it.

Check that it is intact before re-mounting it.

4.3 Cleaning of machine vents

The machine should be kept clean so as to let

cooling air pass freely trhough the machine vents.

5.0 Storage

The machine should be stored in a frost-free

room!

Pump, hose and accessories should always be

emptied of water prior to storing as follows:

1. Stop the machine (toggle switch in pos. OFF)

and detach water hose and accessory.

2. Restart the machine and activate the trigger.

Let the machine run until no more water runs

through the spray handle.

3. Stop the machine, unplug and detach high

pressure hose. Both are coiled up and placed

on the hook on the back of the mac hi ne.

4. Place spray handle, nozzles and other acces-

sories in the holders of the machine.

Should the machine by mistake be frozen, it will

be necessary to check it for damage.

NEVER START-UP A FROZEN MACHINE.

Frost damages are not covered by the

guarantee!

6.0 Questions and answers

Why do I have to use an atomizer for some deter-

gents?

Some detergents (except from soaps) must be

applied undiluted. For that purpose an atomizer or

maybe a brush is unique.

Why must the high pressure washer be stored in a

frostfree room?

The machine may contain water which, when fre-

ezing, may damage vital parts.

How do I store my high pressure washer in the best

possible way?

Always empty the high pressure washer of water

by activating the trigger of the spray handle - after

having disconnected the water supply. Always de-

tach the high pressure hose and coil it up without

ben ding it.

May I use an ordinary detergent in my high pres-

su re washer?

No. You may damage the cleaner and achieve a bad

result. The detergents of ALTO have been specially

developed for use with a high pressure washer and

ensures a correct dosage and a quick effect.

Can I do anything special to keep my high pres su re

washer in a good condition?

Yes, beyond cleaning it carefully before set aside,

it will be a good idea to lubricate the couplings now

and then with grease or vaseline.