Alto aero series Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alto aero series. Alto aero series 20 pagina's. Wap technology

HOW TO ASSEMBLE THE MACHINE

CAUTION!

On delivery, the accessories - are lying in the tank and

must be removed before the machine is used for the first

time. See figure 2.

To assemble the machine, remove the machine top

section:

The power cord must not yet be inserted into a plug

socket.

1. Open the retaining clamps and lift off the machine top

section (Figure 3).

2. Place a bag-type filter into the tank as described in the

instructions printed on the filter.

3. Fit the machine top section back on the tank, and close

the retaining clamps.

4. Connect the suction hose. The "Wap Multifit" enables

any Wap Technology suction hoses (27, 32, 36, 50 mm

diameter) to be connected to the machine (Figure 4).

Electrical Compressed Air Connection

The operating voltage shown on the rating plate must

correspond to the voltage of the main power supply.

Ensure that the machine is switched off and insert the

plug of the power cord into a properly installed and fused

plug socket with ground.

Connecting Electric Tools

aero 7 AS/E:

Connect the electric tool to the appliance plug socket on

the control panel (Figure 5).

Before connecting a tool, ensure that both the machine and

the tool are switched off.

For maximum power consumption of the electric tool to be

connected, see the Specification Table on page 5.

WAP TECHNOLOGY Wet/Dry Vacuums Operator's Manual

Figure 2

Figure 3

Figure 4

Figure 5

Page

-7-