3Doodler Create+ Gebruikershandleiding - Pagina 12
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3Doodler Create+. 3Doodler Create+ 16 pagina's.
Ook voor 3Doodler Create+: Gebruikershandleiding (11 pagina's)
Pagina afdrukken
8. My Pen won't heat up!
It takes around 60-90 seconds for your Pen to heat up. If, after
that time, the Pen still does not heat up and the Light remains
RED, turn the Pen ON and OFF and try again. If that still does not
work, please contact us at [email protected] and we will
assist further.
SECTION 4: TIPS AND BEST
PRACTICES
Pay attention to Plastic types
and settings
• For optimal Doodling, we suggest using the correct temperature
settings for your Plastic.
• DO double check which type of Plastic you are using before you
turn on the 3Doodler Create+ and insert a Plastic strand. If your
Plastic strands get mixed up, here is a handy table for sorting and
identifying what you're working with.
ABS (MATTE):
Temp: ABS / FLX Temp
Light: BLUE
Feature: Great for drawing in the air.
How to tell: Plastic has white
semi-circle ends.
PLA (GLOSSY / CLEAR /
METALLIC / SPARKLE ):
Temp: PLA Temp
Light: GREEN
Feature: Gossy and making it perfect
for artistic creations.
How to tell: Very rigid, no white
semi-circle ends.
FLEXY:
Temp: ABS / FLX Temp
Light: BLUE
Feature: Make flexible,
bendable Doodles.
How to tell: Plastic is very flexible.
Do not forget to snip your
Plastic ends
• After removing a Plastic strand
from the 3Doodler Create+, cut
and remove any partially melted
material at the end of your
strand before re-feeding it into
the 3Doodler Create+. This will
reduce blockages or clogging
issues.
Reverse and remove Plastic
correctly
• DO NOT pull Plastic from the back of the 3Doodler Create+
other than as directed.
With the Pen set to ABS / FLX,
wait for the BLUE Light to
come on.
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 11
(light stays red).
1
BLUE Light
Unsnipped Ends
VS
2
Flashing
BLUE
x2
Double click either Speed
Button and the Light will start
flashing to signal the Plastic is
reversing.
11
Take
• DO give y
continuou
Treat
• If you eve
Nozzle, DO
when your
is cold. Lig
or GREEN.
• If you eve
your Nozz
the Nozzle
as you cou
and perma
3Doodler
Specification
SPECIFICATIO
SPECIFICAT
Output Power: 6W
Input: 100-2
Output Voltage: 5V
Output: +5V
Input Voltage: 5V
CARE & MAIN
CARE & MA
For care and
For care and maintena
3Doodler Cr
3Doodler, please refer
To troublesh
To troubleshoot, pleas
LIMITED WA
LIMITED WAR
For more de
the3Doodle
For more details on yo
the3Doodler.com/wa
For 3Doodle
For 3DoodlerÕs Term
website: th
website: the3Doodler
This device
Snipped Ends
to the follo
interferenc
including in
Warning: C
the party r
operate the
NOTE: This
its for a Cla
limits are d
interferenc
and can rad
in accordan
radio comm
will not occ
This marking in
harmful int
other househo
determined
human health
promote the su
to try to co
measures:
This device complies w
- Reorient o
following two conditio
- Increase t
(2) this device must ac
- Connect t
may cause undesired
- Consult th
CAN ICES-3
11/5/2018 11:37 AM
Once the
Pen by ge
which the