3Doodler Flow Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3Doodler Flow. 3Doodler Flow 9 pagina's.

Pagina afdrukken

STEP 2:

Load and extrude

plastic

STEP 3:

Doodle your name

Use the box on page 4 to

create your first Doodle!

11/2023

Select a spool (included in

the box).

After 10-15 seconds, plastic

will begin extruding from the

nozzle. Extruded plastic will

harden after a few seconds.

Write your name in the box

provided using a marker, pen

or pencil. We suggest cursive,

with the letters connected.

Trace your name in a continuous

line by dragging the pen along

the paper as if you were writing

with a pencil, with all the

letters connected. Keep your

movement slow and steady.

For best results, hold the pen at

close to a 90˚ angle.

SECTION 2: GETTING STARTED

Wait for the LED light to turn

GREEN/BLUE. Click the FAST

button once and release. You

will hear the drive gear start.

Click either speed button

once to stop extruding.

NOTE:

The pen tip must make contact

with the paper for it to stick.

Click either speed button once. When the plastic starts

extruding, press the nozzle down onto paper to get the plastic

to stick to the surface.

When you are done, stop

extruding by clicking either

speed button once.

Insert the spool into the

plastic loading port.

Wait for the material to cool

and then bend the corners

of your paper to pop your

doodled name off the page.