Balt 90124 Montagehandleiding - Pagina 4
Blader online of download pdf Montagehandleiding voor {categorie_naam} Balt 90124. Balt 90124 15 pagina's. Single floor carrel
Pagina afdrukken
5.
Place the Left Side Panel (P-1) with the Predrilled holes
facing up and install 2 each Cam Posts (D) in the 2
threaded insert nuts (Pre-installed)
as shown in illustration # 2.
6.
Install 2 each Dowels (E) into the holes as shown in illustration # 2.
7.
Attach Left Side Panel (P-1) to Left Leg (P-6 ) as shown in illustration # 2.
Secure by turning the Cam Locks (C) 1/4 turn until they lock.
8.
Attach Left Keyboard Slide (P-8) to the Left Side Panel (P-1) using 2 each
Screws (A1) as shown in illustration #2.
9.
Attach 1 Glide Bracket (F) using 1 Socket Screws (A) and 1 Interior
Threaded Posts (B) as shown in illustration #2. Tighten Screws using
Phillips Screwdriver.
10.
Insert 1 Glide (G) into the Glide Bracket (F) as shown in illustration #2.
C
D
P-8
E
A1
To Secure Cam Locks, Insert
Large Phillips Head Screwdriver
and turn Cam Lock 1/4 turn (90
degrees) clockwise.
Be sure that arrow on
top of Camlock (C)
aligns with centerline of
Edge Drilled hole.
D
P-1
A
F
B
4
Phillips
Screwdriver
P-1
Centerline of
Edge Drilled
hole.
P-6
G
Illustration # 2
Arrow