Balt HI-LO-3 45972 Montagehandleiding - Pagina 5
Blader online of download pdf Montagehandleiding voor {categorie_naam} Balt HI-LO-3 45972. Balt HI-LO-3 45972 7 pagina's. Adjustable pneumatic workstation
Pagina afdrukkenTo raise height of unit, loosen adjustment knob (G) and press handle on height adjustment
bracket upward toward top. The pneumatic cylinder will begin lifting the unit, and you can
release handle at the desired height. Secure unit at desired height by tightening adjustment
knob (G).
To lower height of unit, loosen adjustment knob (G) and press handle on height adjustment
bracket upward toward top. Press on center of Top Platform using body weight. Top Platform
will lower and you can release handle at the desired height. Secure unit at desired height by
tightening adjustment knob (G).
Slide the Top Support (P-2) over the
12.
Cylinder Assembly (P-8) as shown
in illustration #5. Be sure that rod
locks into Top Support (P-2) for
correct height adjustment.[See
Detail-A.]
DETAIL A
Should you require assistance
during assembly, please call our
Customer Service Department
Monday - Friday 8 a.m. - 5 p.m.
Central Standard Time
Toll-Free Customer Service
1-800-749-2258
Height Adjustment
G
Base
Assembly
5
G
Illustration # 5
Top
Assembly
P-2
P-8
45972A-11-02-12