ESE HD-206/SD Bedienings- en onderhoudshandleiding - Pagina 5
Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} ESE HD-206/SD. ESE HD-206/SD 13 pagina's. Hd/sd sdi time and date inserter
Pagina afdrukkenitems available with each menu. Holding the Up and Down pushbuttons down advance and
decrement the seconds at a 5ms/s rate.
4.2 Rear Panel
4.2.1
Power Module
The power module on the rear panel accepts an IEC 320 three-wire line cord. A 2-amp fuse is
also part of the power module. The line cord must be removed to access the fuse.
4.2.2
SDI Input
The HD/SD SDI Input is accessible on a rear panel BNC.
4.2.3
SDI Outputs
Two identical HD/SD SDI outputs are provided on rear panel BNCs. One device may be
connected to each output. The output format is the same as the input format.
4.3 Video Insertion
4.3.1
Two Windows
The date and time, the date, the time or up to 30 characters of text can be superimposed onto
the video in two independent windows. The 30 characters of text can be superimposed onto
either or both windows. Both windows can be blanked if desired.
4.3.2
Fonts and Colors
Ten different font sizes are available. Grayscale and six solid color fonts (red, orange, yellow,
green, blue and violet) are included.
5.0 SETUP
The LCD and pushbuttons allow the user to set up the features of the HD-206/SD without using the Control Panel
software. The menus are traversed using the left and right arrow buttons. The user can browse the options
available for each menu by using the up and down pushbuttons. The last selection made when exiting a menu is
selected.
Important Note: When the user stops on a selection by using the up and down arrow buttons and moves on to
the next menu, that item is selected. If no buttons are pressed for 30 seconds while navigating the menus, the
current item is selected and the display reverts back to the time and date. If the settings are changed via the
menu or Control Panel software, they are not made permanent for 30 seconds. Because of this, the unit should
not be turned off for 30 seconds after changes are made to the settings.
The default LCD display shows the time and date. Characters before the time and date indicate what is displayed.
An example is shown below.
RTC
12:34:44
2017/01/01
This example displays the real time clock (RTC) time 12:34:44 and date 2017/01/01 (Y/M/D).
5.1 MENU SELECTIONS
The listings below show the menu title in bold followed by the selections available for that menu title along
with a description of each selection.
DAYLIGHT SAVING:
ON or OFF – Turn this setting ON to have the unit automatically adjust for Daylight Saving Time.
VIDEO HOUR:
12 or 24 – This selects 12 or 24 hour time format for the video display.
VIDEO DATE:
YEAR-MONTH-DAY – This selects the YEAR-MONTH-DAY format for the video display.
MONTH-DAY-YEAR – This selects the MONTH-DAY-YEAR format for the video display.
DAY-MONTH-YEAR – This selects the DAY-MONTH-YEAR format for the video display.
- TEXT DISPLAY -
This menu selection allows the user to set the text display. Use the up or down button to enter the text
entry screen. Use the left and right buttons to scroll to the desired position. Use the up and down
buttons to select the character. To move to the next menu selection, scroll left or right until the cursor
stops blinking and press the up or down button to exit the text entry screen.
Page 2
Revision 1.2