BALTENSWEILER LET S Montage- en bedieningshandleiding - Pagina 2
Blader online of download pdf Montage- en bedieningshandleiding voor {categorie_naam} BALTENSWEILER LET S. BALTENSWEILER LET S 2 pagina's.
Pagina afdrukkenBALTENSWEILER
LET S
ASSEMBLY- AND OPERATING INSTRUCTIONS
Safety information, protection class and instructions
!
See supplementary sheet M 1130
Assembly Instructions
Remove the protection cap
1
Push the rod into the ball up to the stop and
2
tighten with the Allen screw
The ball joints can be adjusted here
3
Assembly and disassembly of the luminaire head:
4
When assembling the rod with the luminaire head,
place hole
on hole
A
Gently screw
C
Attach the magnetic contact onto the rod.
1
3
Operating instructions
Switch:
4
- Short press: On and off
- Long press: Dim
M 1127 / 16090
LICHT UND LEUCHTEN
.
B
in the M3 grub screw.
2
Stop
Anschlag
2
www.baltensweiler.ch
4
A
Magnetic contact
B
C
Small Allen key
3
Cable depot in the base
Tel. +41 41 429 00 30
Do not tighten/loosen these screws!
(Adjusted by the manufaturer)
5
A
B
C
Lucerne, 09 January 2019 / SaWa