DIVIMATH HDZero Goggle Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DIVIMATH HDZero Goggle. DIVIMATH HDZero Goggle 17 pagina's.

Setup

The HDZero goggle has many features that can be customized to the individual pilot.

There is a sliding power switch on the right side of the goggles. You may use it to turn on/off

the goggle, or just leave it on and plug/unplug the DC barrel plug to turn the goggle on and off.

The goggle supports 2S-6S (7-25.2V) power input. Please make sure the power polarity is

correct before powering on the goggle.

Mode

HDZero Digital

Expansion module+ IRC RapidFire

AV In

HDMI in

Note: RapidFire is a product of ImmersionRC limited. It is not included.

The goggle includes a 1200mm XT60 cable for connecting a battery in your pocket. You may

also purchase a shorter 90mm cable on

goggle head strap.

The XT60 cable (either 1200mm or 90mm) has no voltage regulator. The cable passes voltage

directly through the goggle.

Note: Do not connect an over 6S battery to the goggle, as the maximum voltage rating of the

goggle is 6S.

The goggle includes both a wide face plate and a narrow one. You may choose the appropriate

one to fit your face, and use the included 7mm thick foam padding for both comfort and

preventing light leakage.

After goggle is powered on, you will see an image on the OLED displays. Complete the following

steps to adjust the optics:

1. Focus adjustment: Close one eye and slowly twist the focus knob on that side of the goggle

until the image comes into focus. Once it works well with one eye, repeat the process with

the other eye.

TABLE 1. Power Consumption

HDZero shop

if you wish to locate your battery on the

Power Consumption

1.2A@12V

0.9A@12V

0.7A@12V