3dsimo MultiPro Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3dsimo MultiPro. 3dsimo MultiPro 12 pagina's. Multifunctional tool for workshops and households
Ook voor 3dsimo MultiPro: Gebruiksaanwijzing (2 pagina's)

Pagina afdrukken

Foam cutting extension

Before the first use, it is necessary to

stretch the resistance wire between the

grooves at both ends of the attachment

(see the image), insert the extension

Burning extension

After attaching the extension to

burn and successfully completing

the tutorial, select the desired

temperature of the tip (0 - 100%; 100%

≈ 500 ° C / 932 ° F) and turn on the

heater for the accessory by pressing

the front button.

Soldering extension

After attaching the soldering

extension and successfully completing

the tutorial, select the desired

temperature of the tip (0 - 100%; 100%

≈ 470 ° C / 878 ° F) and turn on the tip

heater by pressing the front button.

into the 3Dsimo MultiPro, select the

desired wire temperature (0 - 100% )

and activate the extension heating by

pressing the front button.

65°