Divine Lighting Hyper 361 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Divine Lighting Hyper 361. Divine Lighting Hyper 361 4 pagina's.

Operation without an External Controller (Master/Slave Mode)

1. Connect all units together using microphone/data cable.

2. Set the 'Master' unit to desired color output, choosing from the 'Fd' (Fading color

change), 'Sn' (Snapping color change), 'Co' (Preset colors), or 'SoUd' (Sound

active) settings described in the Modes of Operation section of this manual.

3. Set all other units (slaves) to 'd001' (not d.001).

4. All units will not have the same output as the master unit.

Modes of Operation

There are six modes of operation, each of which may be accessed by pressing the

'Menu' button on the back of the unit. Each press of the 'Menu' button advances to the

next mode. The modes are:

Display (min to max value) Function

d001

d.001

d.512

Fd01

Sn01

Sn99

Co01

Co99

SoUd

d512

3 Channel Mode (1= Red, 2 = Blue, 3 = Green)

Use d001 setting for slave units.

6 Channel Mode (See DMX Channel Listing)

Fd99

Fade: Color Cycle by Fading (slow to fast; press 'Enter' to

confirm)

Snap: Color Cycle by Snapping (slow to fast; press 'Enter'

to confirm)

Preset Colors (1=white, 2=red, 3=green, 4=blue, etc.)

Sound Mode: Colors change to sound