Camille Bauer SINEAX CAM Gebruiksaanwijzing - Pagina 8
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Camille Bauer SINEAX CAM. Camille Bauer SINEAX CAM 19 pagina's. Graphic display for sineax cam
Ook voor Camille Bauer SINEAX CAM: Gebruiksaanwijzing (12 pagina's)
Pagina afdrukken
4. Display measurements
Via main menu the menu measurements may
be invoked. There the following data are
available:
Customized: Free assembled measurement
data, arranged by the user using the CB-
Manager software.
System: Instantaneous values of the system
and their extreme values with reset facility.
Harmonics: Individual harmonics, THD and
TDD of voltage and current as well as their
maximum values with reset facility.
4.1 Customer specific measurement displays
Because the user doesn't need all of the
provided measurement data, it's possible to
make an almost free assembling of up to 20
display screens using the CB-Manager
software. Existing pages of other measurement
displays may be used or free combinations of
single measurements can be made.
This way it should be possible, that the user
works only with the customized measurement
display. Other pages are then required for
special functions only. The representation of
these data is not shown here in detail, because
it's identical to other existing measurement
displays.
Meters: All acquired meter contents of the
measured system and the I/O's.
I/O, relays: Measurements resp. states of the
I/O's and relays.
Mean values: Trend and last value of the
mean-values with interval time t1 / t2, with
extreme values and reset facility.
Wiring check: Measurements for checking the
correct wiring of the device.
Preference display: If activated, one of the
customer specific pages will be displayed
automatically after a configurable time without
user interaction. This way the appearance of
the device is always similar.
Rotation: If activated, all customer specific
pages will be displayed one after the other. The
rotation interval is configurable.
Preference display and rotation may be
switched on and off via the display settings. But
these functions can not be used at the same
time.
The Measurements menu
has more entries as directly
can be displayed.
8