3DUpFitters Artillery Sidewinder X1 Enclosure Kit Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3DUpFitters Artillery Sidewinder X1 Enclosure Kit. 3DUpFitters Artillery Sidewinder X1 Enclosure Kit 13 pagina's.

Pagina afdrukken

5. Right Panel

The last panel to attach is the right panel. All of the

connectors are attached by now, so what remains

is to attach the panel using 10mm M4 screws.

The right air input vent is also inserted from the

outside at this side.

6. Attach Brace

The center brace ﬁts into the slits on the left

and right sides.

7. Assemble Filament Holder

First remove the cable connector to the

ﬁlament runout sensor.

Next remove the stock ﬁlament holder sides

from the Artillery Sidewinder.

Once the ﬁlament holder is removed it is

safe to place the enclosure over the Artillery

Sidewinder X1.

The stock ﬁlament holder can then be