esera automation Windmill Pro 200 Gebruikershandleiding
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} esera automation Windmill Pro 200. esera automation Windmill Pro 200 4 pagina's. With pulse output and heating
Pagina afdrukken
Art. No. 20020
Performance characteristics
Private and professional applications
weather station
Heating for winter operation
Robust connection cable 3m
Lacquering grey hammer finish lacquer
Stainless steel ball bearings and
screws
Typical fields of application
Protection of awnings, roller shutters
and slats from gusts of wind
Mounting on 50mm mast
(antenna mast)
Wall or roof bracket
flat roof mast
1
Product description
With the professional wind sensor Pro 200, the current wind speed can be recorded and, e.g. in gusts of wind, the
information for retracting an awning or raising roller shutters or blinds / slats can be provided via the system
control.
The wind sensor Pro 200 is an optimal environmental sensor for recording the wind speed for weather recording
in weather stations.
All metal parts of the Pro 200 wind sensor, such as bearings and screws, are made of weather-resistant stainless
steel and are durable over a long period of time. This makes them suitable for many years of continuous use in
professional Smart Home operation or building automation.
Via the sensor interface (S0 interface) impulses are output depending on the wind speed. 4 pulses are output per
revolution. 4 pulses correspond to a speed of 1m/s.
The Pro 200 wind sensor has a pulse output and is intended for connection to the 1-Wire S0 counter module (Art.
No. 11211) or comparable counter inputs.The sensor is weatherproof and has an approx. 3 meter long
connection cable. A mounting bracket, wall bracket or pole for roof mounting (vertical) are available as
accessories.
The energy-saving heating of the wind sensor ensures operation even in winter during snowfall, rain and frost.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change. ESERA-Automation, E-Service GmbH 2019
www.esera.de
User guide
Windsensor / Windmill Pro 200
with pulse output and heating
20020 V1.0 R1.0 Manual
Page 1 of 4