esera automation 11319 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} esera automation 11319. esera automation 11319 4 pagina's. 1-wire controller 1 ethernet w/auto-e-connect
Ook voor esera automation 11319: Gebruikershandleiding (9 pagina's)
Pagina afdrukken
Power supply
In order to supply power, the 1-Wire controller has a wide range input of 9 - 30VDC and is thus equally suitable
for 12V power supplies and for typical industrial 24VDC power supplies.
You can find appropriate top-hat rail or wall power supplies in our webshop.
3
Software
The 1-Wire controller can be configured, steered and read out with every serial terminal software, per virtual COM
Port, UDP or TCP.
4
Technical data
Ethernet Interface:
Firmware Update:
Power supply:
Power consumption:
1-Wire interface: 1-Wire bus (5V, GND and data)
Protective circuits:
Connection:
Output voltage:
Isolation:
5
Ambient conditions
Temperature, operation -10°C up to +55°C
Air humidity:
Protection system:
Protection class:
Measurements:
6
Conformity
EN 50090-2-2
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, Fault-free operation
EN 61000-6-3, Stray radiation
RoHS
7
LED Indicator
The module has various display LEDs. The function of the LED display
Anzeige
LED Green
LED Green
LED Green
Data interface
LED Yellow
Data interface
All rights reserved. Reprinting,, also in excerpts, without prior permission of ESERA and E-Service GmbH prohibited. Technical changes
reserved. ESERA E-Service GmbH 2016
www.esera-automation.de
TCP/IP oder UDP
- 10/100 MBit Ethernet Interface (RJ45)
- Auto Negotiation (Full-duplex and Half-duplex)
- Auto MDI/MDIX
- Support für DHCP or fix IP-Adresse
- DNS Support
- Support User Password for Security
- DYN-DNS Server Support
via ESERA Bootloader -Tool
9-30VDC
maximally 500 mA
ESD protection and polarity protection
Screw terminals (up to 2,5 qmm wire cross section)
5V (+/-10%), maximally 200 mA, overload-proof and short-circuit-proof
Galvanic separation between data and 1-Wire interface
10 - 92% (non-condensing)
IP20
III
35 x 90 x 70mm (WxHxD)
Bezeichnung
Funktion
PWR
power indicator
DATA
Network Link LED
Network activity LED
11319 Manual 1-Wire Controller 1 ETH V2.2
LED flashes 3 times after power on
Flashing at 1-Wire activity
Transmitting data via the data interface
Flashes rapidly if "KAL Receive" has been activated no
"KAL messages" receive.
Page 2 von 4