esera automation ECO 208 PRO Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} esera automation ECO 208 PRO. esera automation ECO 208 PRO 18 pagina's. Professional 1-wire controller
Pagina afdrukken
Module bottom side: Digital Output (Changeover Contact), Power Supply, Sensor Bus Interface (1-Wire) and
Ethernet Connection.
Note
The PE connection of the ECO 208 PRO should be connected to earth potential (PE). This establishes a
functional earth
Note
The module may only be operated at the voltages and under the ambient conditions specified for it. The
operating position of the unit is arbitrary.
The modules may only be put into operation by a qualified electrician.
For further information on the operating conditions, see the following instructions under "Operating
conditions".
Weitergehende Informationen zu den Betriebsbedingungen siehe nachfolgende Anleitung unter
„Betriebsbedingungen".
9
Reset Button
The reset is carried out via the reset button of the system.
When the button is pressed, the unit is restarted. The stored data is retained, but all connections are
Interrupted.
This keystroke does not correspond to an interruption of the power supply.
* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
11603-48 V1.0 R1.1 Manual
Page 6 of 18