3DUpFitters Ender 5 Plus R1 Enclosure Kit Installatiehandleiding - Pagina 16

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3DUpFitters Ender 5 Plus R1 Enclosure Kit. 3DUpFitters Ender 5 Plus R1 Enclosure Kit 18 pagina's.

Pagina afdrukken

that let out all of the volatile organic compounds coming oﬀ the hot end? The key is

the negative pressure combined with the particles' minimal and light.

As you can see, the fan keeps the air ﬂowing in and the harmful particles ﬂoating into

the vent or ﬁlter.

3D Printer Design Matters

The other part of the equation is the printer design. Those printers where the hot end is

at the top of the enclosure make it easier to achieve higher temperatures because the

hot air rises to the top, and the vertical hot end position is ﬁxed. Those printers with

the hot ends at the bottom will always have more problems managing temperature

simply because the temperature is more likely to vary as the hot end goes from the

bottom to the top of the enclosure.

Let Us Help

If you're looking to achieve a particular temperature with your enclosure,

and we'll give some advice on how to manage, but it's not that hard:

Lower Temperature = More Cold Air

let us

know,