Alto-Shaam ED2-48/2S Series Gebruiks- en onderhoudsinstructies - Pagina 4
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Alto-Shaam ED2-48/2S Series. Alto-Shaam ED2-48/2S Series 18 pagina's. Multi-shelf heated display systems
Ook voor Alto-Shaam ED2-48/2S Series: Specificatieblad (2 pagina's)
Pagina afdrukken
I N S TA L L AT I O N
IMPROPER INSTALLATION, ALTERATION,
ADJUSTMENT, SERVICE OR MAINTENANCE
COULD RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
S I T E I N S TA L L AT I O N
In order to maintain
NSF standards, counter
models must be sealed
at bottom by NSF
approved sealant, or
equipped with casters,
or 4" (102mm) legs to
provide minimum
unobstructed space
beneath the unit. Floor
units must also be
sealed at bottom or have
casters or 6" (152mm)
legs to provide
minimum unobstructed
space beneath the unit. Warranty will become null
and void if these directions are not followed.
1. The appliance must be installed on a stable and
level surface.
2. DO NOT install this appliance in any area where it
may be affected by any adverse conditions such as
steam, grease, dripping water, high temperatures, or
any other severely adverse conditions.
3. DO NOT install near a cold air source such as a
freezer, air conditioning vents, or in any area where
outside air fluctuation can affect performance.
4. This appliance must be kept free and clear of
any obstructions blocking access for maintenance
or service.
5. Care must be taken when moving this unit into
place because of its glass components.
®
#870 • ED2-48/2s Series Operation & Care Manual • 3
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN IN
OPERATION.
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.
A number of adjustments are associated with
initial installation and start-up. It is important
that these adjustments be conducted by a
qualified service technician. Installation and
start-up adjustments are the responsibility of the
dealer or user. These adjustments include but are
not limited to thermostat calibration, door
adjustment, leveling, electrical hook-up and
installation of optional casters or legs.
LEVELING
Level the appliance from side-to-side
and front-to-back with the use of a spirit level.
We recommend checking the level periodically to
make certain the floor has not shifted nor the
appliance moved.
NOTE: Failure to properly level this appliance
can cause improper function.
MINIMUM CLEARANCE REQUIREMENTS
Counter and table units must be mounted on
legs of a sufficient 4" (102mm) height to provide
minimum unobstructed space beneath the unit.
These legs are supplied with the unit. Warranty
will become null and void if these directions are
not followed.
TO AVOID BURNS,