esera automation 11308 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} esera automation 11308. esera automation 11308 5 pagina's. 1-wire bus coupler ethernet
Pagina afdrukken
3
Technical data
Ethernet:
Interface:
Ethernet:
Ethernet Interface:
Software Interface:
Operating systems:
Software:
1-Wire Interface:
1-Wire Master:
Interface:
Protection circuit:
Connection:
Output voltage:
Isolation:
Ambient conditions:
Temperature, operation: 0°C up to +50°C
Air humidity:
Dimensions:
Protection class:
Insulation class:
Voltage supply:
Input voltage:
Power consumption
Note:
For the supply of the 1-Wire network, we recommend the use of one of our 1-Wire Hub Modules.
4
Conformity
EN 50090-2-2,
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, Fault-free operation
EN 61000-6-3, Stray radiations
RoHS
5
LED Display
The module has different LED displays. The function of the displays is explained in the following.
Display
LED Green
LED Green
6
Software
In the article download section in our webshop, a software package, including installation instructions, is ready for
download. The bus coupler operated via 1-Wire commands for the DS2480 component.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA-Automation or E-Service GmbH. Errors and technical modification subject to change.© ESERA-Automation, E-Service GmbH 2019
www.esera.de
TCP/IP, UDP (each as server or client)
10/100 Mbps Ethernet Interface (RJ45)
Auto Negotiation (Full-duplex and Half-duplex)
Auto MDI/MDIX
Ethernet to Serial
Virtual Serial Port (VSP)
VSP for Windows Vista, Windows 7, Windows 10
Windows Server 2003 to 2016, all Windows 64-bit platforms
Support for fixed IP-Addresses or DHCP
Support for DNS
Software for Ethernet, Serial and VSP Configuration
DS2480B (bus-master)
1-Wire Bus, 5V, Data (5V signal level) and GND / load
ESD protection and reverse voltage protection
Screw terminals (up to 2,5 qmm wire cross section)
5V (+/-10%), nominally 200mA, max. 300mA
Galvanic separation between Ethernet and 1-Wire interface
10 - 92% (non-condensing)
35 x 90 x 70mm (BxHxD)
III
IP20
8 - 30VDC
typically 250mA (without load at the 5V output)
Label
Function
Power
Display for 5V output voltage
•
•
Active
11308 V1.0 R1.0 Manual
Flashes in the case of 1-Wire activity.
Permanently flashes in the case of the 1-Wire Data Line short-
circuit.
Page 2 of 5