esera automation 19200 Linux Handmatig
Blader online of download pdf Handmatig voor {categorie_naam} esera automation 19200 Linux. esera automation 19200 Linux 9 pagina's.
Pagina afdrukken
Art. Nr. 19200 Linux
Open system hardware and software central
control for smart home,
building automation, IoT and commercial
automation
Hybrid structure consisting of embedded
computer
and 1-Wire gateway
Powerful, modern quad core computer with
1.2GHz CPU speed
Fast readout of all 1-Wire devices in
1-2 seconds cycle
Data exchange between 1-Wire Gateway
and Computer via Modbus or text protocol
Extensive 1-Wire libraries for sensors and
actuators
2 x binary output 16A
2 x binary input 10-30VDC
2 x system clocks with power failure buffer
Comfortable configuration program for 1-Wire
Gateway
and interface parameters
24V power supply for embedded computer
and 1-Wire Gateway
Designed for all 1-Wire network sizes
Top-hat rail housing for control cabinet
installation
1
Introduction
Before you start to install the ESERA-Station 200 and put the device into operation, please read through this
operating manual until the end, especially the section on safety instructions
2
Produkt description
The ESERA-Station is a modern and open-system hybrid system consisting of two modules, a powerful
1-Wire Gateway and an embedded computer.
Both modules are connected internally via serial data interface and the power supply.
Each module has its own power supply unit and a system clock (real time clock) with power failure buffering by a
low-maintenance high-performance capacitor (gold cap).
3
IP-Adressen
On delivery, the ESERA-Station is set to DHCP for LAN and WLAN Interface.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
ESERA-Station 200
Commissioning II
Linux Manual
19200 V1.0 R1.0 Commissioning II
Page 1 of 9