Acoustic Signature TA-9000 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Acoustic Signature TA-9000. Acoustic Signature TA-9000 8 pagina's. Pick-up arm

adjustment plastic with

Alu center pin.

Not OK

6.1 Adjusting the cartridge

Use the plastic (showed in the left picture ) piece and place on top

of the 2 metall pillars facing the Alu center pin downwards. Move

the arm forward or backward so the center pin is exactly fitting into

the small drilled marking on top of the arm. tighten the arm if this

position is exaclty matching. This ensures your template is in the

correct angle for adjusting the cartridge and the distance of the

arm related to the middle of the platter is

correct.............................. ....................................

6.2 Adjusting the cartridge

Make sure to use it in the exact orientation as shown in the pic.

This ensures your template is in the correct angle for adjusting the

cartridge.The front Pin of the Alu part needs to be exactly in the

center hole of the

tonearm............................................................

6.3 Adjusting the cartridge

Lift down the cartridge and place the diamond tip of the cartridge

on the reference point of the alignment gauge and make sure that

the edges of the cartridge are absolutely parallel to the marking

lines printed on the cartridge alignment gauge. For that adjust-

ment it is necessary to take a look directly from the top on the to-

nearm and the alignment gauge. We suggest to align only to the

inner point of the alignment gauge!

6.4 Adjusting the cartridge

Please make also sure that the leading edge of the cartridge is pa-

rallel to the marker lines of the cartridge alignment gauge and the

needle is exactly in the reference point. If not correct it by moving

forward and backward and changing the angle.

Fix the right position through looking the screw on the top.