3DUpFitters CR-10 S5 Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3DUpFitters CR-10 S5. 3DUpFitters CR-10 S5 15 pagina's. Enclosure kit

The ﬁlament guide attaches to the Y motor (vertical

motion) by removing the two nuts, placing the

guide's holes over the two screws, and then

replacing the nuts.

The illustration to the right shows how the runout

sensor ﬁts between the guide and the extruder.