camius BOLT Series Handleiding voor snelle installatie - Pagina 3

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} camius BOLT Series. camius BOLT Series 6 pagina's.

Powering up your Camius IP PoE Camera

You can power up your Camius IP PoE camera using one of three modes:

Mode-1 By connecting it into the PoE port on your Camius Network Video Recorder.

Mode-2 By connecting it to a PoE switch or a PoE injector on your network.

Mode-3 By using a 12VDC 1-2A power supply.

In order to verify that the IP camera is powered on:

-Physical check: The Infrared LEDs around the lens illuminate faint

red light in the dark while the camera is on.

- Using the Device Config Tool, available to download on

https://camius.com/support

search for your IP camera using this Tool.

- Using the VMS Software, available to download on

https://camius.com/support

search for your IP camera using this Software.

-Search using the CAMIUS VIEW App on your smartphone or

tablet.

Accessing IP Camera Configuration

Camera configuration can be acessed on your Camius NVR's interface while the IP camera is

connected via mode-1, a direct Power over Ethernet connection to the PoE port on your NVR.

For direct access to your IP Camera browser configuration page or VMS Software configura-

tion without an NVR, make sure the camera is powered using Mode-2 or Mode-3.

Mode-3: If you are not using a PoE switch or a PoE injector, you can power the IP camera by

connecting a UL-listed 12VDC-2AMP power supply into the DC plug on the camera and an

ethernet cable between the IP camera and the router or switch on your local network.

To configure audio on your Camius IP camera.

Ensure your IP camera is connected using

Mode-2 or 3; navigate to Setup / Device / Audio for

audio settings.

for PC and Mac, once installed you can

Page 2 of 5