ESI ESRTP4RF Handleiding voor installatie-instructies - Pagina 9
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} ESI ESRTP4RF. ESI ESRTP4RF 20 pagina's. Rf programmable room
thermostat
Ook voor ESI ESRTP4RF: Gebruiksaanwijzing (20 pagina's)
Pagina afdrukken
1.5m
Fitting the Programmable Room Thermostat
2.6
The ideal position to locate the Programmable Room
Thermostat is about 1.5m above floor level, in a location
where the thermostat is accessible, reasonably lit and free
from extremes of temperature and draughts. Do not position
the thermostat near sources of heat, such as radiators, lights,
TV, direct sunlight or on an outside wall
Installation
1. Remove the front cover using a flat screwdriver in the
two holes at the top of the programmer and separate
from back plate.
2. If required, fix the back plate directly on the wall using
suitable wall plugs and screws or mount over existing
wall box. Replace the thermostat onto the back plate,
securing the bottom of the thermostat first and clicking
the thermostat into place. Alternatively, use the stand
provided.
3. Insert the 2 x AA batteries provided in the battery
compartment on the front of the thermostat,
underneath the facia. The Programmable Room
Thermostat is now installed and will automatically
start to control the room temperature according to
the factory pre-set programme as shown in the User
Instructions. The display shows the correct time and
9