ESI Neva Duo Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ESI Neva Duo. ESI Neva Duo 16 pagina's. 24-bit / 192 khz usb-c audio interface with 2 microphone preamps
Ook voor ESI Neva Duo: Snelstarthandleiding (3 pagina's)

Pagina afdrukken

ESI

Neva Duo

You can always find the latest drivers and software for both Mac and PC for your Neva Duo

by going to this page in your web browser:

>>> http://en.esi.ms/119 <<<

2.3.1 Installation under Windows

The following explains how to install Neva Duo under Windows 10. If you use Windows 11, the

steps are basically the same. Do not connect Neva Duo to your computer before you install the driver

- if you have connected it already, disconnect the cable for now.

To start the installation, launch the setup program, which is an .exe file that is inside a recent driver

download from our website by double clicking on it. When launching the installer, Windows might

display a security message. Make sure to allow the installation. After that, the following dialog on

the left will appear. Click Install and then the installation will be done automatically. The dialog on

the right will appear:

Now click Finish - it is strongly recommended to leave Yes, restart the computer now selected to

reboot the computer. After the computer has rebooted, you can connect Neva Duo. Windows will

automatically setup the system so you can use the device.

To confirm the completion of the installation, please check if the orange color ESI icon is displayed

in the taskbar notification area as shown below.

If you can see it, the driver installation has been completed successfully.