ACOUSTIC SOLUTIONS KW-TB001 Gebruiksaanwijzing - Pagina 4
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ACOUSTIC SOLUTIONS KW-TB001. ACOUSTIC SOLUTIONS KW-TB001 11 pagina's. Tower speaker
Pagina afdrukken
Setting up
1.
Pull out the plastic safety strip on the remote control to activate the battery.
2. Plug the FM wire aerial into the 'FM Antenna' socket on the back of the Tower speaker.
3. Plug the power cable into the mains power wall socket and switch on.
4. Switch the power switch on the back of your Tower speaker to 'On'. The white LED ring
on the front of the Tower speaker will now light up.
5. The Tower speaker is now in standby mode and ready to use.
Remote control
Power on/Standby
Tune down/Skip back
Volume -
Treble -
Bass -
Reset (bass and treble)
Battery compartment (at rear)
Requires 1 x CR2025 battery (supplied)
Input
Play/Pause
Tune up/Skip forwards
Volume +
Treble +
Bass +
Mute
6
Your Acoustic Solutions Tower speaker
Front panel
Display
Tune up/Skip forwards
On-Off/Mode select
Control ring
Back panel
Power on/off switch
Power cable
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021
Remote control sensor
Volume control
Play/Pause
Tune down/Skip back
FM aerial socket
Left and right
line in sockets
Auxillary input socket
7