ClearMirror BigSexy 16105-306024M Handleiding voor installatie-instructies - Pagina 5
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} ClearMirror BigSexy 16105-306024M. ClearMirror BigSexy 16105-306024M 7 pagina's. Showerlite led back-lit, fog-free shower mirrors
Pagina afdrukkenNOTICE: This stage requires two people. One to hold the mirror and another to connect the
wires with UL approved wire nuts or snap connectors.
DO NOT LET MIRROR HANG FROM CONNECTED WIRES!
Mounting the Mirror
1. One or two people to hold the mirror while another connects and wraps the heater leads with
electrical tape.
2. Feed the excess lead wires into the junction box.
3. Test to make sure the heater is working. It takes 3 to 5 minutes to heat the mirror.
4. Apply mirror mastic or Kerdi Fix adhesive to the mirror back on areas that will contact the wall
board. It is safe to apply mastic on the heater.
5. Apply a continuous bead around the entire perimeter of the mirror back (See Figure 3).
6. Carefully mount to the wall.
7. Securely tape and brace the mirror in place for 24 to 48 hours or until dry.
Mirror Back
Use Premium Mirror Mastic for Best Results
To prevent damage to the mirror backing, use Gunther Premier Plus Mirror Mastic or Kerdi Fix.
Available from your local mirror/glass/tile shop or online through Amazon or CR Laurence.
Other mirror mastics will work but these are recommended. See ClearMirror.com/FAQ
Apply continuous mastic bead around
the entire edge of mirror back to create
a moisture seal.
Figure 3. Applying Mirror Mastic.
Heater