ACOUSTIC SOLUTIONS WJ-202 Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ACOUSTIC SOLUTIONS WJ-202. ACOUSTIC SOLUTIONS WJ-202 9 pagina's. Bluetooth speaker with wireless charging
Pagina afdrukkenAUX IN connection and operation
For audio sources without Bluetooth capability you can connect via the 3.5mm AUX IN socket (9) on
the back of the WJ-202.
1. Use the 3.5mm audio lead supplied to connect an audio source to the AUX IN socket (9). On
connection you will hear an audio message, "AUX mode " and the Power/Mode LED (7) will be lit a
constant Red.
2. Select and play tracks using the controls on your audio source .
3. Short press
(4/3) to increase or reduce the volume level. Press
track will continue to play).
When the aux lead is disconnected the WJ-202 will revert to Bluetooth mode.
Wireless charging
With Qi enabled wireless charging capability
If you have a phone with wireless charging capability you
can use your WJ-202 to charge it.
1. Place your smartphone centrally on the phone stand (5)
as shown beside.
2. The battery charge status can be seen on the display of
your phone and the wireless charging LED (6) will be lit
when charging is complete.
Please Note: 1. You can still charge your phone when WJ-202
is a USB power connection.
2. During wireless charging (with the USB cable connected) , the input power can only support
wireless charging and cannot charge the speaker battery at the same time. Battery charge level will
drop if the speaker is used during wireless charging. If the WJ-202 battery level is low you will need to
stop wireless charging and give the WJ-202 battery time to recharge.
3. If the USB cable is unplugged during wireless charging, wireless charging will stop for 8 seconds
while the electric circuit switches from using mains to using the built-in battery.
If problems occur when charging or if charging does not start
• Remove your smartphone from its case if the thickness of the case exceeds 5mm or if it has a metal
composition .
• The optimum charging position for phones with wireless charging function can vary by brand/
model some phones may need to be placed slightly o centre. The charging time varies depending
on the charging capacity of the battery and its current residual capacity.
• The components may heat up during the charging process. They will slowly cool down again after
the charging process.
Need technical support? Call our experts on 0345 604 0105 or go online at www.argos-support.co.uk
Bluetooth Speaker with Wireless Charging | Instruction Manual
(2) to mute the sound (the
5