Akiyama DX-101 USB-R Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Akiyama DX-101 USB-R. Akiyama DX-101 USB-R 11 pagina's. Mp3 recording usb turntable
Ook voor Akiyama DX-101 USB-R: Gebruikershandleiding (14 pagina's)

Pagina afdrukken

TONE ARM ASSEMBLY

1. Push the power to on and the speed indicator and the stylus
illuminator will light up.
2. Insert target light for illumination the stylus.
3. Place a record on the turntable mat. When playing a 45rpm record
with a large centre hole; place the 45rpm adapter on the centre
spindle.
4. Set the rotation speed (33/45/78) to match the record.
5. Release the arm clamp.
6. Set the cueing lever to the up position.
7. Press the Start/Stop button and the turntable platter will start to
rotate.
8. Move the tone arm over the desired groove.
17. HEADSHELL - Install cartridge here. When installing a cartridge, refer to the
installation instructions supplied by the manufacturer of that cartridge. During
installation, attach the stylus protector to guard the stylus tip from damage.
Attach wires as follows:
White (L+) Left channel+
Blue (L-)
Left channel -
Red (R+)
Right channel+
21
Green (R-)
Right channel-
20
19
18. S-SHAPED TONE ARM
19. TONE ARM LEVER Controls the up and down action of the tone arm lift.
20.ANTI-SKATE CONTROL This applies inward force to the tone arm so it
18
doesn't skip outward across the record due to the centrifugal force of the record
spinning. Cartridge manufacturers usually specify the proper setting of this.
21. COUNTERWEIGHT Adjustment creates the proper downward pressure of
the stylus to the record. Attach now by sliding the counterweight onto the rear of the
tone arm. Twist it lightly and it will screw onto the rear shaft of the tone arm.
17

OPERATION

9. Set the cueing lever to the down position, the tone arm will descend
slowly onto.
The record and play begins.
10. Set the desired pitch adjusts range by depressing the buttons until
the desired pitch is reached.
11. Adjust the pitch to a desirable speed.
12. To suspend play, lift tone arm with cueing lever.
13. When play is finished, raise the cueing lever, move the tone arm to
14. Press the Start/Stop button to stop the platter rotating.
15. Push the power to off.
dx turntables
Options are +/-10%.
the armrest and secure the tone arm with the arm clamp.
4