Akiyama DX-202 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Akiyama DX-202. Akiyama DX-202 11 pagina's. Professional turntable

Pagina afdrukken

d x t u r n t a b l e s

1. START/STOP

Press this button to start or stop the platter.

2. PLATTER

3. MOTOR OFF

Press the button to enable motor off, and the led will be flash .

Press the button again to disable function.

4. TARGET LIGHT

Insert target light to the deck and it will light up.

5. PLATTER REVOLUTION SPEEDS (rpm)

33 rpm Press 33

45 rpm Press 45

78 rpm Press 33 and 45 buttons simultaneously. To return to 33 or

45rpm play mode, just press the desired button.

6. REVERSE

This button is used to reverse the direction of the platter rotation.

7. HEAD SHELL LOCKING NUT

Attach the headshell by inserting into the front end of the tone arm,

then turn the locking nut clockwise with the head shell firmly held

horizontally.

8. PITCH SLIDER

Use this to change the speed of the platter when the PITCH indicator

is NOT lit.

PART NAMES AND FUNCTIONS

9. TONE ARM

This is a fully manual tone arm. To start playback, gently place the

stylus on the record using the headshell finger support. Do not drop

the stylus onto the record as it may cause damage to the diamond

tip and to the record.

10. 45 RPM ADAPTOR

Place on center spindle for playing 7" records with large center holes.

11. ANTI SKATE KNOB

When a record is playing, a force is generated drawing the stylus

towards the center of the record. Set this knob to the same value as the

stylus pressure to offset this force.

12. COUNTERWEIGHT

Use this to balance the tone arm and to adjust the stylus pressure.

13. POWER SWITCH

This switch turns the power on or off, including the motor and audio

signal

14. POWER CORD CONNECTOR

Used to connect the included power cord.

15. GND

Ground wire connection post

16. PHONO OUTPUT

This is the standard analog output (RCA jacks) which can be

connected to phono input on any DJ mixer.

dx turntables