ClearOne Aura Xceed BMA Snelstarthandleiding - Pagina 9

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} ClearOne Aura Xceed BMA. ClearOne Aura Xceed BMA 12 pagina's.

Xceed™ BMA

4. Install the fasteners/anchors in the wall.

5. Align the mounting holes on the Versa USB mounting ears with the pilot holes.

6. Use four #6 or M3.5 screws to attach the Versa USB to the wall.

Note: Anchors and screws to mount the Versa USB are not provided. The installer must select them for the wall

material that supports the Versa USB. Exercise care when you drill and install anchors so wall material does not tear

out and weaken the attachment.

Connect the Components

Description of Controls and Connections

BMA CTX

Figure 1. BMA CTX Back Panel

Warning:

Power over Ethernet (PoE) equipment used with Xceed BMA must meet the IEEE 802.3af or 802.3at

standards.

You should use the PoE Power Injector provided with Xceed BMA. Other power source equipment may

immediately apply power and could damage the Xceed BMA components.

Speakers Out. Two Phoenix Euroblock connectors for external 8 ohm speakers

PoE In: RJ45 connector. The Xceed BMA does not use this connector.

The Versa USB provides power to the BMA CTX through the P-Link In

connector.

Power Select sliding switch. Position determines power source – either left for

PoE In or right for P-Link In.

With a Xceed BMA, this switch is set to the right for P-Link In.

P-Link In: RJ45 connector. Receives power, audio, and control from the Versa

USB.

P-Link Out: RJ45 connector.

Connects to another P-Link device that requires power, such as a Bluetooth Wall

Panel.

QSG-0091-002v1.2 May 2021