ClearOne DIALOG 20 Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} ClearOne DIALOG 20. ClearOne DIALOG 20 6 pagina's. Usb wireless microphone systems
Ook voor ClearOne DIALOG 20: Snelstarthandleiding (14 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (8 pagina's)

Pagina afdrukken

DIALOG 20 Wireless Transmitters

Syncing Transmitters with Receiver:

1. Simultaneously, press the two buttons on the bottom of the receiver module. "SCANNING" shows

on the receiver's display for 5 to 10 seconds followed by "SYNCING".

a. To sync a Boundary Mic or Podium Mic:

While the receiver shows "SYNCING", Press and hold the "Mute" button, power on the

transmitter and then release the "Mute" button.

b. To sync a Handheld or Beltpack:

While the receiver shows "SYNCING", Press and hold the "Select" button, power on the

transmitter and then release the "Select" button.

Both the transmitter and receiver display will read "SYNC PASS" when the sync is successful.

2. Repeat the procedure if the receiver display shows "SYNC FAIL ".

3. Check the audio.

"SCANNING" will only be displayed if auto-scan is enabled.

Reading the Handheld Mic and Beltpack LCD:

04.6H

BATTERY

MIC-1 RM-4

ON-OFF

CH 1

LVL+20 DB

LCF 75 HZ

AUDIO

10 MW

Microphone Audio Settings

Battery Life Runtime Counter

Audio Level

Battery Level and Charge Status

Editable Microphone ID Labeling (Up to 10 Characters)

Power Setting

Programmable Button Setting

RF Channel Assignment

QSG-0138-001v1_DIALOG_Transmitters_2021_09_21

Quick-Start Guide