ClearSpan 103938 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ClearSpan 103938. ClearSpan 103938 15 pagina's. Frame 20' wide x 20' long

Pagina afdrukken

CLEARSPAN

JUBILEE TENTS

™

REQUIRED TOOLS

The following list identifies the main tools needed to

assemble the shelter. Additional tools and supports may be

needed depending on the structure, location, and

application.

•

Tape measure or measuring device

•

Marker

•

Variable speed drill and impact driver (cordless with

extra batteries works best)

•

Wrenches or ratchet and socket set (recommended)

•

Scissors or utility knife

•

Hammers, gloves, and eye protection

•

Ladders, work platforms, and other machinery for lifting

designed to work safely at the height of the shelter

•

Rope (or straps) for cover installation

•

5/16" Hex key wrench

UNPACK AND IDENTIFY PARTS

The following steps will ensure that you have all the

necessary parts before you begin to assemble the shelter.

Unpack the contents of the shipment and place where

you can easily inventory the parts. Refer to the Bill of

Materials/Spec Sheets.

Verify that all parts listed on the Bill of Materials/Spec

Sheets are present. If anything is missing or you have

questions, consult the Pictorial Parts Guide and all

shelter diagrams throughout these instructions for

clarification, or contact Customer Service.

NOTE: At this time, you do not need to open the plastic

bags containing the fasteners (if used).

FRAME OVERVIEW

For a quick overview of this shelter and its components,

consult the Full Frame - Top View and Lower Frame - Top

View diagrams at the back of this manual.

Consult the remainder of these instructions for important

details that will help during the construction.

SPECIAL NOTE: Baseboards for Frame

These instructions recommend installing a baseboard

under the legs of the frame. The baseboard runs from the

front to the back of the building.

This baseboard is not included with the shipment and must

be supplied by the customer. Treated or recycled plastic

lumber works well for a baseboard.

The baseboard, when installed properly, helps prevent the

shelter from sinking into the ground when anchored.

Consult these instructions, or contact Customer Service for

additional information regarding baseboards.

PIPE IDENTIFICATION NOTES

The pipe sent with your shelter is identified by length and

diameter. Each pipe part number contains information that

helps describe the pipe. Understanding this information

results in easier assembly of the frame.

For best results and before assembling the various frame

components consisting of different pipe lengths, consult the

information that follows:

EXAMPLE #1: Pipe #190S099D

•

The number 190 refers to the pipe diameter, which is

1.90".

•

The letter S refers to the tapered or swaged end of the

pipe. This tapered end is inserted into the plain end of

another pipe.

•

The 99 indicates the length of the pipe measured end-

to-end.

•

The letter D indentifies the pipe as one that includes

holes drilled through the pipe and one or both ends.

These holes are used to secure the pipe to a coupler

using a bolt and nut.

NOTE: Some pipes include the letter P in the part

number, which indicates that the pipe is a plain pipe with a

consistent diameter throughout its length. Such pipes are

not tapered or swaged.

Some pipes are not drilled for mounting bolts. Part numbers

describing these pipes will not include the letter D.

EXAMPLE #2: Pipe #131P063

This part number desribes a plain (P) 63" pipe (63) that is

1.315" in diameter (131) and that is without drilled holes—

no letter D—for mounting bolts.

ATTENTION: Pipes shown above are used for examples

only. Your shelter may not include these pipes.

Revision date: 07.01.08