ClearSpan R035B00011A Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} ClearSpan R035B00011A. ClearSpan R035B00011A 15 pagina's. Greenhouse door kits

DoubLe TWIN-WALL DooR ASSeMbLY (continued)

17.

At the top and sides of the end wall door opening on

the inside of the frame, attach end cap and allow it to

extend below and into the door frame opening.

ATTeNTIoN: This profile acts as a stop for the

double doors, which prevents undo stress on the

hinges. Consult the photos to the right.

Photo shows the end cap as attached to the

door jamb. View shows the assembly from the

outside.

Cross section insert shows the end cap (dashed

line) attached to the inside/back of the door

jamb.

Dashed line below identifies where to attach the

end cap profile. The end cap extends beyond

the frame members and into the rough opening

to stop the door in the frame and to help seal the

gap between the door and frame.

18.

After end cap profile is installed, install another section of the same end cap on the

includes the chain latch.

NoTe: This end cap serves as a stop for the remaining door of the double door assembly when both doors are

closed.

19.

Check the operation of the latches and the doors.

20.

After installing the door to the frame, read the care and maintenance section.

Revision date: 05.28.10

Twin-Wall Double Swinging Doors

Step 17c

Step 18

Ground Level

Door Jamb

The installed polycarbonate end wall panels

have been removed to better show the door

jamb.

inside frame of the door that

End cap used for door stop

Step 17c

Door

Frame

opening

End Cap

(#104548)

and seal.