Dixon Bayco VR6500 Installatie- en bedieningsinstructies - Pagina 3

Blader online of download pdf Installatie- en bedieningsinstructies voor {categorie_naam} Dixon Bayco VR6500. Dixon Bayco VR6500 4 pagina's. Drop elbows

Pagina afdrukken

VR6000, VR6200 and VR6000 Drop Elbows

Check Operation

VR6500 / VR6200 elbow

1. Place elbow bottom end on service station adapter (elbow is

designed for use with vapor 4" top seal adapter only). Move operating

handle to the 11 o'clock open/unclamped position.

2. Release and hold the safety latch if equipped with one. Move the

handle clockwise to 2 o'clock position for full clamping (lever cannot

be moved any farther).

3. Check locking arms on adapter. If the elbow is fitted with a safety

latch, make sure the stem pin is in the latch notch, preventing

movement of operating handle. Release by moving handle to 11

o'clock. If fitted with safety latch, lift the latch lever and operating

lever at the same time.

VR6000 elbow with D-handle

1. Place elbow bottom end on service station adapter. Pulling on D-

handle is not necessary, coupler mechanism is self-engaging; simply

push elbow vertically down onto service station adapter until locking

arms pop in.

2. Now push down on handle to ensure full clamping (handle cannot

be moved any farther).

3. Check locking arms on adapter. Release by pulling on handle until

locking arms disengage.

Care and Handling

Dixon Bayco drop elbows are tested at the factory and are in proper

working condition when shipped. Drop elbows are designed to be

tough and to provide long service with reasonable care and handling.

To ensure long service, Dixon Bayco elbows should not be thrown,

dropped or dragged; such actions may compromise the integrity and

reduce the service life of the product.

VR6500/VR6200/VR6000

877.582.3569