ClearSpan 103476 Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ClearSpan 103476. ClearSpan 103476 13 pagina's. Portable greenhouse 10' wide x 20' long

Pagina afdrukken

Step 12: Cut off the excess strap leaving about 12" in length.

Step 13: Feed the strap through the center slot in the ratchet and tighten only slightly.

Step 14: The hem containing the cover conduit needs to be slit or notched directly above the side

ratchets you installed. If your cover was not notched at the factory, continue with this step. Cut

a 2" long slit in the hem just above the cover conduit. Repeat this step on the other side of the

hem so you can pass a 1" wide strap over the conduit through the slits.

Step 15: Locate the 3' long 1" wide straps. Pass the strap through the slit over the cover conduit

above each ratchet. Feed both ends of each strap down through the slot in the ratchet and

tighten slightly. Refer to the photo on Page 11 for assistance.

Step 16: Check that the cover is still centered evenly from front to back and side to side.

Step 17: Tighten the end ratchets first and then the inside ratchets. If the ratchets need to be

released, open them completely and they will release. Excess strap can then be pulled through

the ratchets and re-tightened.

Section H - Shelter Maintenance

Thank you for purchasing this ClearSpan

proper care and maintenance of the shelter will ensure many years of exceptional performance.

The following notes include several items that need periodic checking.

• Cover must be kept taut; check and adjust tension periodically.

• Check connections and fasteners for tightness; replace and/or repair missing or damaged parts.

• Contact ClearSpan for assistance in identifying needed parts; call us toll-free at 1-800-245-9881.

• If shelter is moved after construction, inspect shelter thoroughly before reuse.

• Do not allow snow to accumulate on the cover.

• Use a means of snow removal that will not cut or damage the cover.

• Never attempt to climb on or stand on the shelter or its frame.

• To ensure longer zipper life, do not allow door to flap in the wind.

• When opening, roll up door and secure.

• Close door frequently to ensure moisture does not accumulate in roll-up.

• Depending on contents stored in shelter, construction of shelter and shelter materials, and the

geographic location of shelter, the potential for condensation does exist. ClearSpan

items that can be incorporated into the shelter to alleviate a condensation condition. If condensation

develops in your shelter, please call a ClearSpan

• Note that ClearSpan

shelters (Truss Arch excepted) do not have any tested loading criteria.

Strap Installation

Poly Shelter. Following instructions for assembly and

representative for more information.

Page 13

offers several