DIY Guitar Pedals 7 Min Fuzz Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} DIY Guitar Pedals 7 Min Fuzz. DIY Guitar Pedals 7 Min Fuzz 15 pagina's.

Off Board Wiring Diagram

Using a non-switched Miniature DC Jacks and 2 Mono Jacks (kit option with diyguitarpedal kits)

"CLR" = Current Limit Resistor. This resistor (included with your LED and bezel controls the brightness of the led and stops

the LED from blowing. Also note the flat side of the LED, examine your LED closely you will note it physically has a flat

side. This is the negative side of the led as pictured above

The Lugs of the Miniature DC Jack

The miniature dc jacks that are sold as a kit option with PCBs have 2 lugs, 1 short and 1 long and should be connected as

shown in the picture to the right. To confirm

which lug is which, sight done the socket hole,

you should be able to see which lug is

connected to the pin and which is connected

to the barrel of the jack. Also note that

miniature dc jacks do not allow for battery

switching, they can only be used for DC

power.