ClearView PowerBoards PB-DG-001 Installatie- en gebruikershandleiding - Pagina 7
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} ClearView PowerBoards PB-DG-001. ClearView PowerBoards PB-DG-001 9 pagina's. For ram 1500 pick-up truck 2015-2018
Pagina afdrukken6. Feed the 2 ECU Wiring Harnesses down behind the steel shelf at the base of the Glove Box Opening.
7. Remove the 2-wire black plug from the Grey Plug Wiring Harness labelled 31-2066 and hardwire the
white and yellow wires to the white plug located in the top left corner of the glove box opening (Step 3).
Connect white to white & Connect yellow to green.
Remove Plug
8. Plug the wiring harnesses back into the rear of the ECU and position the ECU onto the base of the Glove
Box Opening, as shown above.
Page | 7
Due to Clearview Continuous Improvement Program, information may change without notice.
Clearview takes no responsibility for the result of incorrect use of these installation instructions.
PB-DG-001
PB-TA-001
April 2018