Edgewater Networks EdgeProtect 7300 Hardware installatiehandleiding - Pagina 5
Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Edgewater Networks EdgeProtect 7300. Edgewater Networks EdgeProtect 7300 18 pagina's. Enterprise session border controller 7000 series
Ook voor Edgewater Networks EdgeProtect 7300: Hardware Handleiding (16 pagina's)
Pagina afdrukkenEdgeProtect 7300 Back Panel
Component
Erase Button
VGA Port
Port 6, Port 5,
Port 4
Port 3 -
Management
Interface
Port 2 - WAN
Interface
Port 1 - LAN
Interface
USB Ports
Serial Craft
Console Port
Input Power
Socket
ON/OFF Switch
© 2013 Edgewater Networks, Inc. All rights reserved.
Description
1 Click – No action
2 Clicks - Reset CLI and GUI password – no service interruption
3 Clicks - Restore to factory default and reboots the system
Currently not used
Currently not used
1 x 10/100/1000 Mbps RJ-45 Ethernet port for optional management network
connectivity. This interface must not be on the same network as the WAN or LAN
subnets. This network cannot be within a subnet contained in a "Route" statement
1 x 10/100/1000 Mbps RJ-45 Ethernet port for connectivity to the WAN or Internet
network connectivity - Default IP: none
1 x 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity. Default
IP: 192.168.1.1
Currently not used.
1 x RJ-45 serial craft console port for management. 9600-N-8-1 NONE for flow
control. An RJ-45 to DB9 console cable is included in the box with the
EdgeProtect 7300.
Accepts 3-pin shroud female plug for input power
System power on/off
5