Edgewater Networks EdgeMarc 5300LF2 Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Edgewater Networks EdgeMarc 5300LF2. Edgewater Networks EdgeMarc 5300LF2 5 pagina's. Enterprise session border controller
Pagina afdrukkenStep 1
Connecting the Cables
1. Plug one end of the power adapter into an AC outlet and the other end into the AC inlet
on the 5300LF2, shown in the preceding image as "A".
2. Turn the power switch on (shown in the preceding image as "B").
3. Connect one end of an RJ-45 cable into the Console Port of the 5300LF2. This port can
be seen in the "A" of the following image. You can use the included RJ-45 to female DB9
cable. Connect the other end of the cable to your computer's DB9 port.
Make sure that the power LED, shown in the previous image as "B" is solid green and
the status LED, shown in the previous image as "C", is flashing red intermittently.
Instructions