ClearWater Microzone 300 Installatie- en bedieningshandleiding - Pagina 4

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} ClearWater Microzone 300. ClearWater Microzone 300 4 pagina's. Ozone systems, corona discharge ozone generators

Pagina afdrukken

INJECTION METHOD INSTALLATION

step 1: Mount the Microzone ozone generator to a suitable flat surface, using the two

self-tapping screws provided. nOTe: The distance from the Microzone to the

injection port should be no more than 8 feet.

step 2: Attach one end of the supplied tubing to the ozone outlet port of the Microzone

generator and secure with a hose clamp provided.

step 3: Coil the tubing to create a "Hartford Loop" above the water line. Insert the check

valve provided at the highest point of the Hartford Loop (see Figure 3).

Determine orientation of the check valve by blowing through it, flow should be

directed to the point of use.

step 4: Attach the other end of the tubing to the injection port and secure with the hose

clamp provided.

step 5: Plug the Microzone into a suitable outlet. If the PRO Series system is being used,

the Microzone may be plugged into its switched outlet provided. nOTe: All

equipment wiring and grounding must comply with all local electrical codes.

Figure 1

Shown: PRO10 with Microzone 300 ozone generator

Switched

Power

Main Power

Water Flow

Injector Port

Microzone 300

O Z O N E

G E N E R A T O R

Air Flow

Check Valve

Water Flow

DIFFUSION METHOD INSTALLATION

step 1: Mount the Microzone ozone generator to a suitable flat surface, using the two

self-tapping screws provided. nOTe: The distance from the Microzone to point

of diffusion should be no more than 8 feet.

step 2: Cut a suitable length of the supplied tubing, attach one end to the air prep outlet

of the pressurized source used. Attach the other end to the air inlet port of the

Microzone and secure with a hose clamp provided.

step 3: Attach one end of the supplied tubing to the ozone outlet port of the Microzone

and secure with the hose clamp provided.

step 4: Coil the tubing to create a "Hartford Loop" above the water line. Insert the check

valve provided at the highest point of the Hartford Loop (see Figure 3).

Determine orientation of the check valve by blowing through it, flow should be

directed to the point of use.

step 5: Attach the opposite end of the tubing to the barbed fitting of the diffuser stone

provided.

step 6: Plug the Microzone into a suitable outlet. If the OAS7 is being used the

Microzone may be plugged into its switched outlet provided. nOTe: All

equipment wiring and grounding must comply with all local electrical codes.

Figure 2

Shown: OAS7 with Microzone 300 ozone generator

Air Prep Outlet

Switched

Power

note: OAS7 maximum head pressure: 6 feet

Air Flow

Microzone 300

O Z O N E

G E N E R A T O R

Air Flow

Check Valve

Diffuser Stone

Main Power