ClearWater mineralpure R-50 Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} ClearWater mineralpure R-50. ClearWater mineralpure R-50 16 pagina's.

I). CHOOSING THE POWER SOURCE

(Continued)

Connecting the control box to the pump motor

Disconnect the back plate to the motor where the electrical connections are. You will

notice two connections where the power source comes in and is connected. Connect the

MineralPURE's power cable (black, white and green) to the same as the motor's

connections. If connected properly, the unit should come on and off with the motor.

J). STARTING UP THE SYSTEM

When all of the above steps have been completed, it is time to start up the system. Open all valves and turn the power on.

Check for water leaks and all electrical connections for proper and firm connections.