ClearWater Lights Darla Installatiehandleiding - Pagina 3
Blader online of download pdf Installatiehandleiding voor {categorie_naam} ClearWater Lights Darla. ClearWater Lights Darla 12 pagina's. Led light kit for bmw k1600gt
Ook voor ClearWater Lights Darla: Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (16 pagina's)
Pagina afdrukken
Mounting The Lights
Fender Mount Overview:
• One side at a time, remove both fender bolts. Be sure to keep fender
from hanging in a fashion that damages it. Use a wire tie or piece of wire
to hold the fender until you are ready to install the new bolts. Inspect the
female threads on the brackets for dirt or foreign substance. If possible,
use compressed air (wear protective glasses) or small bottle brush to
clean the threads.
• Pre-assemble the lights and mounting bracket with new bolts. Use
the M6 x 12 mm bolts and M6 washers to secure Glenda/Darla to the
bracket, and the factory fender bolts to attach the bracket assembly to
the fender.
• Gently screw all bolts in hand tight. Inspect the bolt length and spacer
alignment before tightening the bolts. Assembly will resemble the
exploded diagram below.
Page 3
Page 2