ClearWater Lights Glenda Installatiehandleiding - Pagina 8
Blader online of download pdf Installatiehandleiding voor {categorie_naam} ClearWater Lights Glenda. ClearWater Lights Glenda 16 pagina's. Led light kit for bmw k1600gt
Ook voor ClearWater Lights Glenda: Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's)
Pagina afdrukkenStep 2: Mounting The Lights
Fender Mount Overview:
(detailed diagrams on next page)
• One side at a time, remove both fender bolts. Be sure to keep fender
from hanging in a fashion that damages it. Use a wire tie or piece of wire
to hold the fender until you are ready to install the new bolts. Inspect the
female threads on the brackets for dirt or foreign substance. If possible,
use compressed air (wear protective glasses) or small bottle brush to
clean the threads.
• Pre-assemble the lights, mounting bracket, shoulder washers (if
needed) and spacers with new bolts. Add 2 plastic washers to shoulder
washer to make up difference in thickness of front fender.
• Gently screw all bolts in hand tight. Inspect the bolt length and spacer
alignment before tightening the bolts. Assembly will resemble the
diagrams below.
Page 8