ClearWater Lights R1200GSW Voorlopige handleiding - Pagina 7
Blader online of download pdf Voorlopige handleiding voor {categorie_naam} ClearWater Lights R1200GSW. ClearWater Lights R1200GSW 8 pagina's. Billie brake light
Pagina afdrukken
NOTE:
The auxiliary brake light is configured as an "always on" running
light at a reduced light level. When either the front or rear brake is
activated, it activates at 100% brightness. All flashing light modes are
deactivated below 5mph.
FACTORY DEFAULT RESET
To reset the CANopener to the factory settings, hold the left turn signal
switch and press the flash-to-pass button six times within six seconds. All
factory preset dimmer levels and modes will be selected. A successful
reset is indicated by five flashes of the Clearwater lights.
Page 7