ClearWater Lights Glenda Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} ClearWater Lights Glenda. ClearWater Lights Glenda 16 pagina's. Led light kit for bmw k1600gt
Ook voor ClearWater Lights Glenda: Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's)

Pagina afdrukken

Step 5: Aligning the Lights

Alignment:

• Ask an assistant to help you

with this procedure. Make sure the

bike is on level ground and have

an assistant sit on the bike. With a

right angle board or object, position

the board on the floor and slide it

up to the light. The goal is to adjust

the lights so that the light is level

with the ground. Passengers and

luggage may alter the alignment

of the light, so further adjustments

may be needed. You may find that a

slight downward angle (5 degrees)

is helpful.

Posi-Products Installation Instructions:

Posi-twist (A):

1. Strip all wires to be inserted 1/2" .

2. Twist all wires together before inserting into the Posi-twist.

3. Completely unscrew the top from the Posi-twist.

4. Feed the twisted wires through the bottom portion of the Posi-twist.

5. Attach the top and tighten, while ensuring the wires do not slip out of

the bottom of the Posi-twist.

Posi-lock (B):

1. Remove both ends from the Posi-lock.

2. Strip wire 1/2" and insert into bottom portion of the Posi-lock.

3. Hand tighten the Posi-lock onto bottom portion with wire, repeat for other side.

Page 11