ClearWater Lights Glenda Installatiehandleiding - Pagina 4
Blader online of download pdf Installatiehandleiding voor {categorie_naam} ClearWater Lights Glenda. ClearWater Lights Glenda 16 pagina's. Led light kit for bmw k1600gt
Ook voor ClearWater Lights Glenda: Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (12 pagina's)
Pagina afdrukkenSummary of CANopener features and operation
TSC = Turn Signal Cancel WW = WonderWheel (BMW multifunction controller)
FTP = Flash To Pass OBL = Optional Brake Light
Function
Darla/
Glenda dim-
mer
Erica/Krista
dimmer
Erica/Krista
on/off
High Beam
Mode
Horn Activa-
tion Mode
Hazard
Flasher Alert
Mode
Clearwater
Brake Light
(optional)
Reset Default
Settings
Page 4
Command
Press(TSC), then
hold control wheel
left for 2 seconds
and rotate to adjust
Press(TSC), then
hold control wheel
right for 2 seconds
and rotate to adjust
Hold TSC for 2
seconds
Hold brake lever
and press FTP 3
times to toggle
Hold brake lever
and press TSC 3
times to toggle
Hold hazard switch
and press brake
lever 3 times to
toggle
While stationary,
press brake lever
or pedal 5 times
within 5 seconds to
toggle
Hold left turn
signal and press
FTP 6 times within
6 seconds
Modes
Rotate WonderWheel to select 10
brightness levels (10% to 100%)
To adjust brightness on High Beam
Mode, turn on high beam first
Dimmer control will cancel after 2 sec-
onds or by pressing TSC
Mode 1 – on and dimmable (default)
Mode 2 – off
Mode 1 – all lights on 100% with high
beam or FTP, Erica/Krista must be
turned on
Mode 2 – Erica/Krista off with low
beam, all lights on 100% with high
beam or FTP (default)
Mode 1 – horn does not affect lights
(default)
Mode 2 – horn activates lights 100%
Mode 3 – horn strobes lights
Mode 1 – no flash (default)
Mode 2 – lights flash while holding
hazard switch
Mode 1 – off (default)
Mode 2 – functions identically to BMW
brake light
Mode 3 – California legal strobe on
brake activation (4Hz flash)
Mode 4 – speed sensitive (flashes
faster and brighter with harder braking)
Reset all functions to the default set-
tings above